Factors to be considered in selecting surface machining methods for CNC machining

The processing method of the surface of the CNC machined part first depends on the technical requirements of the machined surface. However, it should be noted that these technical requirements are not necessarily the requirements specified in the part drawing. Sometimes, they may be higher than the requirements on the part drawing in some respects due to technological reasons. For example, due to the misalignment of the benchmarks, the processing requirements for the surface of some CNC workpieces are increased. Or, because it is used as a precision benchmark, it may put forward higher processing requirements.

When the technical requirements of the surface of each CNC machined part are clarified, the final processing method that can guarantee the requirements can be selected accordingly, and can determined processing methods of several working steps and each working step. The selected machining method of CNC parts should meet the requirements of parts quality, good machining economy, and high production efficiency. For this reason, the following factors should be considered when selecting a processing method:

5 points to pay attention to in surface treatment of parts

1. The machining accuracy and surface roughness obtained by any CNC method have a considerable range, but only in a narrow range is economical. The machining accuracy in this range is the economic machining accuracy. For this reason, the corresponding processing method that can obtain economic processing accuracy should be selected when selecting the processing method.

2. The properties of the CNC workpiece material should be considered.

3. The structural shape and size of the CNC workpiece should be considered.

4. Productivity and economic requirements are to be considered. High-efficiency advanced technology should be used in mass production. It is even possible to fundamentally change the manufacturing method of the blank, which can reduce the labor of machining.

5. The existing equipment and technical conditions of the CNCfactory or workshop should be considered. When choosing a processing method, the existing equipment should be fully utilized, tap the enterprise's potential, and workers' enthusiasm and creativity should be brought into play. However, it should also be considered to continuously improve the existing processing methods and equipment, adopt new technologies and improve the technological level.

CNC MachiningInstant Quotes: https://www.tuofa-cncmachining.com/